Add supported Realflo versions for Well Test application

Clarify how conditions are adjusted depending on the plunger arrival type

Document Post Arrival Injection type of Continuous Variable Flow.

Clarify how the Advance to Flow command works.

Add section

Describe new Continuous Variable Injection mode for gas lift

Document CSV export

Update for new critical flow calculation type

Update to include Realflo Registers In Use export file in register overlap report

Rebrand to Gen7 Systems

Add recovery mode

Add recovery mode

Reorganiztion sections

Add section for Advance to State control parameters

Document sales valve action settings

Add sections for initial release of app

Document delete buttons for apps, licenses, communications settings and files. 

Added sections for license, communications settings and files sync

Well flow average count moved from the Injection Register Settings group to the Injection Control group

Document changes to gas lift Continuous Critical Injection control mode.

Added configuration and status information for output override with a maximum time.

Added information about the Control Override Action and how shut in settings are used if the Control Override Action is Shut In Injection.

Document the En Gas Lift Control Override control parameter

Show the Gas Lift Override Active status parameter.

Document the Well Flow Average Count configuration parameter

Added information about how newer versions of the Plunger Lift application do not write to modbus registers until the application has been configured.

Clarified how the Critical Flow Max Injection Flow parameter works.

Added section

Delete section

Updated section

Updated download links

Added section

Clarification on how to use the Shut In Delay parameter for shut in injection.

Added information on historic partial arrival time.

Updated for change of Minimum Line Pressure Flow Condition to Maximum Line Pressure

Updated section

Updated section

Document Plunger Travel Preset register

Updated section

Updated section

Fixed some typos and added some additional information

Added a note reminding the user to manually restart the program after an update is installed.

Added section

Updated section for new RTU program links

Updated section for gas lift

Updated section for updated selection of comms settings and compatible apps filter

Updated section for updated selection of comms settings

Updated section

Added section

Updated for new user protection setting.

New screen grab for casing/line pressure differential shut in condition limits

Add casing/line pressure difference shut in condition

Add section

Add section

Add section

Updated screen grabs to show new timestamp logging option.

Rebrand to Simark SCADASuite

Added information on Well Depth parameter.

Added section

Added information on Int32 values

Added information on publishing datalogs on demand

Added section

Added section

Added section

Modified text on sampling and averaging of inputs

 

Function generator application is now called out by name in firmware bundles

Added information on initial state selection

Added section

Updated entire section for publish on change feature and Sparkplug B support

Added section for Alpha release

Clarified behavior of user defined registers

Rewrote section for new extended Modbus configuration functionality

Added information on offline installer

Add sub topics for all tabs. Update screen grabs for new tabbed UI. Add information on new configuration testing functionality.

Add information about register overlap report

Reworked entire section for application changes

Added warning about sharing Register Settings between control loops

Added section

Added information on extended on demand logging features

Added information about the End of Cycle indicator

Reorder section so that the newest notes are at the top

Added information on Modbus RTU in TCP and Modbus TCP protocols

Added section

Added section

Added information about Modbus coil registers to control user defined conditions.

Fixed the text for some conditions to match the description from the application's status screen. In some cases, there was a mistake in the comparison (greater than or less than) for  the condition to be met.

Update entire section for changes to application. Condition enables and setpoints were moved from configuration parameters to control parameters. This allows them to be changed at runtime without reinitializing the control loop. Protection enables and setpoints were also moved from configuration parameters to control parameters.

 

Added very early plunger arrival and no plunger arrival protection settings. Added very early plunger arrival shut in option.

Clarified how to get the latest RTU Applications. Removed an outdated link.

Added section

Removed mention of on demand coils. This feature was reworked to allow multiple datalogs to be triggered from a single coil.

Added information about on demand logging.

Added section on Telepace Export

All

First draft