Gen7 Systems SCADASuite Well Test application works with Schneider Electric's Realflo gas and liquids flow computer to simplify well testing . Key features include:
Support for up to three 3-phase separators.
Store up to 32 unique gas compositions.
Store up to 32 unique liquid product types.
Create up to 32 Well Tests using a combination of the gas compositions and liquid product types.
The ability to accept or reject a test.
Independent purge volume for each run in a test.
Independent control of each test, including starting, stopping, accepting and rejecting tests.
Built on top of the Realflo measurement engine, which is API compliant. The Well Test Application does not do any measurement calculations, it simply configures the core Realflo measurement engine as required and presents the data generated by Realflo.
Easy integration with the SCADASuite Datalogs application.
Detailed diagnostic logging.
Installation
See the Installation section for general installation instructions, including the executable file naming convention.
Licensing
See the Licensing section for general information on application licensing. The Well Test application can be licensed for 1 to 3 separators. Choose the right number of control options for your application and only pay for what you use.
When 1 separator is licensed, it's only possible to start Test 0. When 2 separators are licensed, Test 0 and Test1 will work. In other words, separator licenses are applied to specific loops.
Proper operation of the Well Test application depends heavily on the correct configuration and operation of Realflo.
Supported Realflo Versions
Realflo versions listed below are supported by the SCADASuite Well Test application. Versions not listed are not supported.
