Each output has an associated status parameter, an associated First Out parameter and override timer information. The First Out parameter indicates which shutdown triggered the output to become active. The value of the First Out parameter is only valid when the output status is Delay, Active or Latched Active.
The
Elapsed Override Time value indicates the time that the output has been overridden for and the
Remaining Override Time value shows the time until the override is automatically disabled by the program, but only if the
Maximum Override Time is not 0 (indefinite). The
Elapsed Override TIme is 0 when an override is not active. The
Remaining Override Time is 0 when an override is not active, or if the
Maximum Override Time is set to 0 (indefinite).
Use the
Export Glossary feature, or the
Export Modbus Register definitions feature on the
Export tab to get details of the enumeration for shutdown status. Do not rely on the values shown here, including registers, here because the enumeration and register number may change for the specific version of the application that you are using.
Status Parameters - Outputs
