Each output has has two associated control registers. The Reset command is used to exit the Latched Active output state. This command has no effect when the output is not in the Latched Active state.
The Override command is used to prevent the output from becoming active regardless of the state of the shutdowns that are driving the output. It's possible to configure the maximum time that an override is active, or to allow for an indefinite override.
Use the override command with care. An overridden output will never become active.
See the Applications and Modbus tab for some background information on SCADASuite and Modbus. You can always export the Modbus register map for the application to see an up to date list of what control parameters are available, which registers the information is in, and descriptions of the meaning of the information.
