The video below shows how to configure the Well Test application for 4 different wells. The demo assumes a single 3 phase separator with gas, liquid and water products. Each well that feeds the separator has a different gas composition and liquid product type. The purge volumes and test times are not realistic and are only for demo purposes.
At the end of the test, the test volumes will be in the Realflo batch history registers. The data can be pulled directly from these registers, or the data can be captured in a data log record using the SCADAPack's data logging feature. Data logging can be configured via ladder logic or using the SCADASuite Datalogs application.
The Well Test configuration file and Realflo configuration file can be downloaded here.
