Gen7 Systems SCADASuite Plunger Lift application lets you optimize the production from your gas wells. Key features include:
Control up to 4 wells from a single application.
Sophisticated condition based approach to well control.
Wells with and without a plunger can be managed.
A flow computer is not required, although some control conditions do require accurate flow measurement.
Configurable protection settings can be used to shut a well in under adverse conditions.
Automatic optimization of set points.
Turner and Coleman critical velocity (flow) calculations.
A simulation mode to test basic functionality without needing a well.
A manual override state for complete manual control.
Easy integration with the SCADASuite Datalogs application.
Installation
See the Installation section for general installation instructions, including the executable file naming convention.
Licensing
See the Licensing section for general information on application licensing. The Plunger Lift application can be licensed for 1 to 4 plunger control loops. Choose the right number of control options for your application and only pay for what you use.
When 1 plunger control loop is licensed, only Plunger Control 00 will work and the other control loops will be disabled. When 2 control loops are licensed, Plunger Control 00 and Plunger Control 01 will work. In other words control loop licenses are applied to specific loops.
It is possible to configure the Plunger Lift application in such a way that damage to personnel or equipment may occur. It is the responsibility of the person and company that configures the Plunger Lift application to make sure that the program is configured in a reasonable way to match the specifics of the site where the program is deployed.
