Once you have SCADASuite Manager installed, follow the directions below to download an application to a SCADAPack RTU, and to configure that application after it's running on the RTU. You will need a SCADAPack RTU and Telepace Studio software to complete these steps.
Any SCADASuite program that is loaded onto the RTU will run without a license with all features enabled for 7 days. After 7 days, the program can be downloaded again to get another 7 days. This can be done as many times as you like. Purchasing a license will enable permanent operation.
In the SCADASuite Manager program, click on the Help tab.
Click on the Open RTU Application Links text. This will open a file that shows all of the available application bundles. If you're starting from scratch, choose the latest version of the applications that you want to use. If you've standardized on a specific version, choose the bundle that has the versions that you need.
For more information on application bundles, see the Reference Manual.
Download the bundle that you want.
Use the C/C++ Program Loader feature in Telepace Studio to copy the SCADASuite application bundle to the RTU.
Only one SCADASuite application bundle can be loaded onto the RTU at one time.
Start the program on the RTU.
In SCADASuite Manager, on the Comms tab, create communications settings that match the ones in your RTU.
On the Sync With RTU tab, select the communications settings that you created and connect to the RTU. You should see the applications that you installed on the RTU.
Select the application that you want to import the configuration for and then click the Create New... button. This will import the configuration of the application from the RTU into the local database.
Switch to the Apps tab and make whatever configuration changes that you would like.
Switch back to the Sync with RTU tab, chose the remote applicaiton to update from the Applications on the RTU area, and then choose the local configuration that you want to apply to the RTU from the application configurations listed in the Compatible Local Application Configurations area. Click the Update App with RTU Config button to push the local configuration to the application on the RTU.
You can optionally use the Test tab to connect to the RTU and view live data from the application.